Are you dreaming of a white Christmas … in July? Well dream no longer, we have a dreamy white Supercross combo in this exclusive one off-one only July special.

Check this out!

You can be the proud owner of a brand new 20″ Pro size Supercross Envy V5 in white with the perfect match, a Supercross carbon tapered SLT 20″ fork with 20mm dropouts.

Please note, while this exclusive offer is for just a single combo that includes 20″ Pro Supercross Envy V5 in white and white Supercross carbon SLT forks (with 20mm drop outs) we can also sell them separately and on top of that we are able to help make sure you are looked after with any colour or size Supercross frame or any other Supercross product for that matter.

The price? It’s going to be pretty hard to beat anywhere. But you will need to contact your favourite bike shop for the price.

We don’t often run deals like this so don’t hesitate, get on your phone or drop into your favourite bike shop today ASAP.

The Supercross BMX Envy V5 Frame

The new ENVY v5 starts where the v3 left off. It utilizes the same World Championship winning geometry, but gets an all Brand new 7005 Ultra Lite Race Triple Butted tube set. All brand new molds for the top and down tube to increase strength and rigidity as well as maximizing dent resistance.

In the Pro Size and larger, the top tube and down tube are larger at the head tube to better support the all new 1 1/8” – 1.5 Tapered head tube, the center sections are thicker to increase dent resistance, and the downtube is wider at the BB shell to further enhance pedaling efficiency. The top tube is now a tapered tear drop shape with a flat ridge bottom to maximize strength and minimize weight, the seatmast is a wider bulge butted piece , the rear stays are tapered and butted. Until you get one of these frames in your hands, you can’t begin to believe the amount of time that goes into each frame size to make the most efficient use of the tubing shapes and walls to built you the worlds finest racing machine.

Please note that the Micro, Mini, Junior, Junior Plus, Expert, Expert XL, Expert XXL and the Mini 24″, Junior 24″, Expert 24″ and Expert XL 24″ sizes all use the non tapered integrated head tube so you can use a 1″ or 1 1/8″ integrated headset. It is not tapered on those sizes.

Every Supercross ENVY v5 starts off as a custom Supercross Exclusive tube set. We don’t believe in Hydro forming due to the varied walls it produces, and rather to use a more expensive Taperwall butting process that draws the tube to a precision wall thickness. Each tube is also formed to the most efficient shape for it’s particular job on the frame.

From there each tube is precision mitered and hand loaded into it’s fixture and is hand tig welded to ensure the perfect weld penetration. After each frame is hand welded they are annealed and straightened and placed into an alignment fixture to keep the frame perfectly straight while it is being heat treated. Half way through the heat treatment process it is checked again, and if needed, fine tuned on the alignment table to ensure 100% accuracy on your frame. Only once we know it is straight and race ready, is it finish aged to perfect T-6 hardness.

After the frames are finish aged, they are again checked for alignment, and then the head tubes, and BB shells are machined and threaded to accept the Integrated headset and euro bb’s. Machining and threading after Heat Treating is a much more expensive way to build a frame, but the best way we know to make sure that your assembly is perfect every time.

Next we send the frames out for Powdercoat, Polish or Anodize based upon your order and then apply the Supercross ENVY v5 graphics to match.

Then comes the fun part, pick your size, your color and now you get to take your ENVY v5 out and go ride!!

Geometry of the 20″ Pro Envy Supercross V5 frame

Top Tube: 20.5″
Chainstay Length: 15″
Headtube Angle: 74.5º
Seattube angle: 70º
Bottom bracket height: 11.6″
Seat post size: 27.2mm
Headset: 1 1/8″ – 1.5″

Weight:  2lbs 12oz or 1.25kgs

NOTE

Remember, you can always run a regular 1 1/8″ fork with your ENVY v5 until you get your Supercross SLT Monocoque Tapered Steertube fork. Just grab a Speedline 1 1/8″/1.5″ Sealed Integrated Headset. Want to run a Supercross SLT, no problems, Answer Dagger, got you covered, a Speedline Pro Carbon, easy and done.

The Supercross BMX SLT Carbon forks

The new Supercross SLT BLK Carbon fork is our first venture into a full Monocoque Carbon Fiber fork. The Manufacturing process of a solid 1 pc fork allows a stronger connection from the steertube to the fork blades so it is a stiffer and stronger structure, all while keeping the weight down. The SLT BLK Fork uses a tapered Steer Tube which goes from 1 1/8” at the top to 1.5” at the base to further enhance the forks stiffness and strength. Add in the full carbon w/ aluminum insert dropouts for a 20mm hub and you have a fork that is under 20 ounces that is ready for whatever course you are ready to throw at it.

ABOUT SUPERCROSS BMX AUSTRALIA

Supercross BMX Australia are supporters of BSX and the Royal Children’s Hospital and while we have our own Supercross and Speedline/Supercross teams we also co-sponsor the bmxultra.com, Ken Collins Racing team and the Anarchy Australia team.

Did you know that Supercross BMX Australia is the exclusive distributor for Supercross and Speedline products?

We only sell our products through reputable stores who can provide you with the service and expertise that will help you get the most out of your bike and your dollar.

We are proud to support local industry and local riders who also buy local.

To find out more information about Supercross BMX products and Speedline Parts checkwww.supercrossbmx.com.au

If you would like to purchase Supercross BMX products in Australia please have your local bike shop contact us. Please note, we do not sell direct to the public. We support the Australian BMX Industry! Do You?

For more information and dealer enquiries email sxaustralia@supercrossbmx.com.